The construction of these plates was long winded and complicated, which was intentional so as to make the forgery of the finished article almost impossible.
The first stage involved the engraving of a background for the design. This was produced with a rose engine which laid down a circular pattern of symetricial design onto a piece of soft steel. This was then partly cleared to leave a square shape and an area in the centre was further cleared in the shape of Queen Victoria's head ready for engraving.
At this stage the die was passed to the engraves who, working from a sketch provided by Henry Cole, engraved the head in the centre.
Following this the labels were engraved at the top and bottom of the die, along with corner squares to take the stars and check letters. Finally the stars were engraved into the top corners.
At this stage the die was hardened and a series of impression made on a transfer roller which as its name implies, was used to transfer the image from the die to the printing plate. Once these images were complette on the roller, this was in turn hardened.
A shhet of soft steel was cut which was sufficient in size to take 240 impressions of the stamps arranged in 20 horizontal rows of 12. Onto this plate were marked a series of guide dots, some of which were joined with guide lines to allow the correct registration of the impressions. Many of these dots and lines show on te printed stamps and allow them to be correctlly assigned to the plate from which they were printed.
Using the transfer roller, the impresions were transfered to the plate under great presureuntil the the required 240 impressions was completted. Finally the check letters were inserted into the lower corner using hand punches. As such the possition of these letters on each stamp differs slightly from one plate to the next and provide an aid for collectors wishing to assign a given stamp impression to its correct plate. Finaly the marginal inscriptions were added to the four sides of the sheet using a seperate roller and te plate hardened ready for use in production.